Advanced Scale is an ISO/IEC 17025:2017
Accredited Scale Calibration Laboratory

24/7 SERVICE
phone CALL US
877-626-0242

Used Industrial Scales

Marble Table

Marble balance table provides the most stable surface possible for precision instruments. Natural characteristics ─ density properties, absorption rates, shock and vibration reduction slide, combined with the right hardness classification for the ultimate in dampening effect and elimination of vibration. Table is suitable for laboratory, analytical, semiconductor, and clean room environments. The legs are reinforced with powder coated steel support. All edges are rounded,  the table top is 2.5″ thick and legs are 2.375″ thick. The marble is easily cleaned.

Price  $600 + LTL trucking

___________________________________________________________________________

GSE Bench Scale

Condition: Used. Excellent working condition and appearance.

Features: Connects to Computer, Detachable Display, Overload Indicator, Piece Counting, Stainless Steel Platform

This is a GSE 550/570 (programmable) weight indicator with a GSE 50 lb capacity scale base and column. The 550 is a weighing indicator and the 570 is a counting weight indicator and can be programmed to be either the 550 or 570. The 550/570 is programmable for automation and/or communication. A service manual is available via email. This is all stainless steel construction and is suitable for harsh environments. These were part of my rental scale fleet and have not rented them in over 5 years so it’s time for them to go.

Price: $895.00 + shipping


Single Ended Beam Load Cell 250 lb Capacity

Condition: New – Open box

Model 40310, a bending beam load cell, is designed to provide precision performance under adverse conditions. The cell is environmentally protected with water resistant seal and neoprene sleeve. Its high alloy tool steel construction and low cost makes it an excellent choice for heavy wash down areas. The cell is supplied with an integral 20 foot cable

  • 250 pound capacity
  • Environmentally protected with neoprene sleeve
  • High alloy tool steel
  • BBS Replacement
  • Low profile
  • Factory Mutual (F.M.) Approved
  • Interchangeable with Rice Lake Weighing Systems RL40BBS, Sensortronics 60007, BLH LBG1, Fairbanks 3-481-1 & 3-486-1, HBM BBS, and Coti Global Sensors CG-BBS.

Price: $200.00 + shipping


Scale Ball Top

Condition:  Refurbished

Features: Stainless Steel Platform

This is a 24″ x 24″ ball top for a 24″ x 24″ scale weighing platform. Slight damage in 2 corners. This is ideal for a shipping scale or a scale on a roller conveyor system.

Price: $100.00 + shipping


Scale Ball Top

Condition: New

Features: Stainless Steel Platform

This is a stainless steel ball top for a 24″ x 24″ scale weighing platform. This fits over your existing 24″ x 24″ scale. This is ideal for scales in a shipping area or in a roller conveyor system.

Price: $100.00 + shipping


Pennsylvania Scale Co 8400 Counting Scale

Condition: Used but in excellent condition

Features: A/C Power Adapter, Backlit Display, Overload Indicator, Piece Counting, Stainless Steel Platform

The Pennsylvania Scale Company model 8400 is a 50 lb capacity counting/weighing scale. It has a touch screen display and has dual base capability for a second scale base of a larger or smaller capacity. A Pennsylvania Scale Company connector is required and available if needed.

Price: $495.00 + shipping


UMC ECS500 Counting Scale Dual Base

Condition: Used

Features: Dual base capability, AC/DC operation, Overload Indicator, Piece Counting, Rechargeable Battery

This is a 50 lb capacity counting scale with dual base capability. It runs on AC or an internal rechargeable battery. The battery will need to be replaced. Units of measure are pounds and kg. Scale has an RS-232 serial communication port to send data to a printer.

Price: $250.00 + shipping


Test Weight Tree

Condition: New

This test weight tree is capable of holding ten 50 pound test weights for a total weight capacity of 500 lbs. This is ideal for hanging a known weight to test and calibrate tank/vessel scales and suspended hopper scales.

Price: $325.00 + shipping


Avery Weigh Tronix WI-150 LCD Display

Condition: New

Avery Weigh Tronix WI-150 intrinsically safe weight indicator LCD display

Price: $50.00 + shipping


Avery Weigh Tronix WI-150 Fiber Optic I/O PCB

Condition: New – Open Box

Avery Weigh Tronix WI-150 intrinsically safe weight indicator I/O analog cutoff fiber optic PCB. AWTX does not support the WI-150 any more and there are no more of these boards available. Last AWTX list price was $661.

Price: $100.00 + shipping


GSE 650 Series Analog Output Option

Condition: New

GSE 650 Series Analog Output module.

Price: $225.00 + shipping


GSE 650 Series RS-485 Network Option

Condition: Used

GSE 650 series programmable controller/weight indicator RS-485 network options were used in GSE 657 controllers. Customer changed the data collection system and these options were no longer required. They were working when removed from the GSE 657’s. Mounting hardware not included.

Price: $50.00 + shipping


Ohaus Electronic Balance 400 grams x .01 gram

Condition: Used

Used Ohaus Galaxy 400 balance that still works. I was able to calibrate this scale with class 1 test weights and it worked nicely. 400 gram capacity x .01 gram divisions. Scale has an RS-232 serial port for data communication. Unit is sold as is.

Price: $200.00 + shipping


Cardinal Mechanical Scale Manuals

Condition: Used

These are manuals for Cardinal Scale Manufacturer mechanical scales. They include dial head scales, motor truck scales, dormant scales, suspension hopper scales, and over under indicators. Manuals have detailed exploded view with parts numbers. These are owners and maintenance manuals. These are probably from the 1950’s 1960’s.

Price: $50.00 + shipping


 

Copyright © 2001 - 2022 Advanced Scale Inc.   •   13 Delta Drive, Unit 6   •   Londonderry, NH 03053   •   877-626-0242  
Privacy | Site Map